Print spooler is a vital service on a Windows computer to send the print job to the printer. It should run smoothly to print / send your files to the printer. For a few reasons, print spooler keeps stopping Windows 10 PC, even starting it manually may not solve the problem until the real issue is fixed. This guide shows you how to automatically stop the print spooler on Windows 10, 8.1 and Windows 7.
Usually, no errors or warnings would occur if the print spooler keeps stopping Windows 10 or 8.1 computers. If you print (send a print command) from MS Word, Excel or any other application, you won’t see any messages. If the printer driver or software is smart enough to detect to solve print spooler keeps stopping error, it can notify you. The only sign you can see is that all mounted printers are shown as disabled/inactive, as shown below. Though print spooler doesn’t work, you can’t see these printers ‘ properties.
While the above screenshots were taken from older operating systems, they are suitable for Windows 10 and 8.1.
Methods to Fix Print Spooler Keeps Stopping Automatically on Windows 7, Windows 10, and 8.1
The simple step you can take immediately is to manually start the Services print spooler service (or stage 2 of the prompt command).
1)’ Services’ can be found under Computer Management, but it is easy to access under Windows 10 or 8.1 in the Services.MSC search form.
Services. MSC Open services and find Print Spooler, I’m sure it will stop so you can start it right now.
2) Use this method to start/stop spooler printing in the command prompt if you like commands. Be sure to open a command prompt for the administrator privilege (run as an administrator).
Net stop spooler
To start print spooler, type; net stop spooler If the print spooler fails to stop on Windows 10,8.1 or 7 after the print spooler has started, follow steps below.
3) You can try the steps below if you believe that print spooler does not respond to your print commands and that printing does not occur when the printer is physically excellent (no paper jam or hardware error). This approach can help clear the exceptional print jobs (print queue) and hanging spooler operation.
Remove the print spooler files where print jobs are temporarily stored by the Operating Systems, clearing those files will allow the print spooler to start fresh and run smoothly next time.
Go to C > Windows > System32 > Spool > Printers and remove all of the folder files. This is where the OS handles the print jobs before they are sent to the printers. Once these files have been deleted, it will clear the queue for printing. The same location applies to the latest Windows 10 and 8.1.
Spool One of the above steps would have solved the print spooler keeps stopping error Windows 10 desktop or laptop computer.
Further measures to address it If the problem still exists on your Windows 10, 8.1 or Windows 7 machines even after you’ve attempted earlier stages (if the actual printer connection is excellent and there are no printer, ink and paper problems physically).
Additional steps to fix it
- Make sure every move has been taken earlier.
- Go to the Computer Management Services (as in step 1), double click the Print Spooler Service and go to the Recovery tab. Here we can set what this service should do if it fails.
- Select ‘ Restart the service’ in the Subsequent Failures section. Therefore, if it fails, it will attempt to restart the print spooler service.
- This cannot be the permanent solution if the spooler process fails to stop and restart again and again automatically for some other purpose. Knowing and solving a real problem is more comfortable.
- Go to the Dependencies tab and make sure you start all the programs. Luckily, the Remote Procedure Call (RPC) service is just one print spooler dependency service.
- So, check-in services for the RPC feature and make sure it’s already begun, these methods also appeal to Windows 10,8.1 and 7.
- The last movie that worked for me recently was incorrect print driver installation.
- Yes, if you’ve installed a completely unrelated wrong driver on any network or local printer, this print spooler can often face a stopping problem. By default, Windows OS attempts to connect with all printers very often, even if you don’t print on them. If the printer and operating system speak wrongly due to incorrect driver installation, the print spooler service will be stopped automatically by Windows.
- Remove from your computer all unwanted printers, try these two methods.
- Make sure the correct drivers (or at least similar models) are installed on all printers.
- It will fix my issue very quickly once I have modified to correct the print engine.
I’m sure the print spooler will solve one of the methods on Windows 10, 7, and 8.1 that will automatically stop the problem. Besides, updating the printer driver and installing the correct print driver can also be a solution.